3-7.Lip channel steel

Size [mm]		Cross-sectional area cm2	unit mass kg/m	Of the center of gravity position cm		Moment of inertia of area cm4		Second moment of area radius cm		Moment of inertia cm3
HxAxC	t			Cx	Cy	Ix	Iy	ix	iy	Zx	Zy
60x30x10	1.6	2.072	1.63	0	1.06	11.6	2.56	2.37	1.11	3.88	1.32
60x30x10	2.3	2.872	2.25	0	1.06	15.6	3.32	2.33	1.07	5.20	1.71
75x45x15	1.6	2.952	2.32	0	1.72	27.1	8.71	3.03	1.72	7.24	3.13
75x45x15	2.3	4.137	3.25	0	1.72	37.1	11.8	3.00	1.69	9.90	4.24
100x50x20	1.6	3.672	2.88	0	1.87	58.4	14.0	3.99	1.95	11.7	4.47
100x50x20	2.3	5.172	4.06	0	1.86	80.7	19.0	3.95	1.92	16.1	6.06
100x50x20	3.2	7.007	5.50	0	1.86	107	24.5	3.90	1.87	21.3	7.81
120x60x20	2.3	6.092	4.78	0	2.13	140	31.3	4.79	2.27	23.3	8.10
120x60x20	3.2	8.287	6.51	0	2.12	186	40.9	4.74	2.22	31.0	10.5
125x50x20	2.3	5.747	4.51	0	1.69	137	20.6	4.88	1.89	21.9	6.22
125x50x20	3.2	7.807	6.13	0	1.68	181	26.6	4.82	1.85	29.0	8.02
150x50x20	2.3	6.322	4.96	0	1.55	210	21.9	5.77	1.86	28.0	6.33
150x50x20	3.2	8.607	6.76	0	1.54	280	28.3	5.71	1.81	37.4	8.19
150x65x20	3.2	9.567	7.51	0	2.11	332	53.8	5.89	2.37	44.3	12.2
150x75x20	3.2	10.21	8.01	0	2.51	366	76.4	5.99	2.74	48.9	15.3
200x75x20	3.2	11.81	9.27	0	2.19	716	84.1	7.79	2.67	71.6	15.8
200x75x20	4.5	16.22	12.7	0	2.19	963	109	7.71	2.60	96.3	20.6
Reference: "Machine Design Handbook for Engineers" (Revised by Saburo Kano) Industrial secondary products Dimensions and weight of metal materials Page 602 Quoted from lip groove shaped steel.